Will a Ram Truck Fit Your Garage? Measure Before You Shop
A Ram truck will fit your garage only if it clears the doorway, fits inside with usable room around it, and can make the turn into the parking space. Before you shop, measure all three: the opening, the interior and the approach. Then compare those measurements with the exact model year and configuration you are considering.
Quick Answer
Measure the narrowest doorway clearance, the usable parking area and the driveway route into the garage. Include mirrors, door-opening space, shelves and overhead obstacles. Check the exact truck’s length, width and height, and leave practical room to park and get out. A truck may fit inside but still be difficult to maneuver into place.
Measure the garage opening and parking space
Start at the entrance. Measure its clear width between the closest obstructions and its height from the floor to the lowest point. Include trim, door tracks and any hardware that reduces clearance. Do not assume the stated size of the garage door is the usable opening.
Next, measure the spot where the truck would sit. Check the usable depth from the closed garage door to the back wall, and the width between the nearest obstacles. Count cabinets, workbenches, stored bikes and anything else that will stay there. Note where the garage door sits when open, too.
Measure overhead clearance above the whole parking area. Door mechanisms, lights, storage racks or a sloped ceiling may limit height. If another vehicle shares the garage, decide how much space it needs and whether you need a clear walkway alongside the truck.
Check the exact Ram’s dimensions
Do not shop from a single general figure for “a Ram.” Cab, bed, trim and equipment can affect the truck’s dimensions. Compare the specifications for the exact year and configuration with your measurements. Check overall length, width and height, and clarify whether a listed width includes mirrors. If you are evaluating a particular vehicle, confirm its measurements using its VIN or vehicle documentation.
Use the narrowest point in your garage and the truck’s widest relevant measurement for comparison. A body-width figure alone may not tell you whether the mirrors will clear the doorway or nearby shelves. If there is little clearance, verify mirror dimensions and whether they fold on that exact vehicle. Do not count on folding mirrors to solve a tight fit unless you are comfortable using that routine every time.
Test the driveway approach, not just the parking spot
In a North Texas home, the approach can be the deciding factor: a narrow driveway, gate, landscaping or another parked vehicle can limit the turn. Measure the usable route and look for anything the truck must pass or swing around. Consider where you will line up before entering the garage, not only the space where the truck will end up.
When you evaluate a truck, bring your measurements and check how it feels to approach, turn and position in a safe, suitable space. See whether you can open the driver’s door enough to get out, and whether the mirrors have room to clear. A test drive cannot confirm your home’s clearances, but it can help identify which measurements need a closer check.
There is no single extra-clearance number that works for every garage. Allow enough space for your actual parking approach, the doors you need to open and any walkway or storage you want to preserve. If the fit looks close on paper, measure again and verify the exact truck before deciding.
Frequently Asked Questions
Should I measure the garage door or the interior first?
Measure both. The truck must clear the opening and fit in the usable parking area after accounting for walls, storage and other vehicles.
Does the truck’s width include its mirrors?
Not necessarily. Check what the listed width measures, then verify mirror clearance for the exact year and configuration you are considering.
How much room should I leave around a Ram truck?
There is no universal clearance that suits every garage. Leave enough room for your approach, the doors you need to open and any walkway or storage you plan to keep.
Can a Ram fit in my garage but still be hard to park?
Yes. A tight driveway turn, restricted approach or limited space to open the driver’s door can make parking awkward even if the truck fits once inside.
Which measurements should I check for the exact truck?
Check overall length, width and height for the specific year, cab, bed, trim and equipment. Clarify mirror clearance and confirm the dimensions of a specific vehicle with its VIN or documentation.
What should I do if the measurements are close?
Recheck the narrowest clearances, including door hardware and obstacles, then confirm the exact vehicle’s dimensions. Do not rely on a rough estimate when a small difference could determine the fit.
Once you have your measurements, compare configurations in the Ram truck inventory or browse used CDJR vehicles. For help identifying a truck to evaluate, contact Brandon Tomes Chrysler Dodge Jeep Ram with your garage and driveway measurements.